Celestial Studioflitsers
€749,00
De Celestial Flitser beschikt over HSS en TTL flitsmogelijkheden, een ingebouwde ontvanger, een 160W equivalent daglicht gebalanceerd modelleringslicht en werkt volledig op batterijen (kan worden opgeladen tijdens het fotograferen). De HSS- en TTL-functies worden bediend met de HUB-afstandsbediening (HUB-afstandsbediening vereist voor firmware-updates).
Perfect voor: Zowel outdoor- als studiofotografen die op zoek zijn naar high-end specs zonder het gewicht of de prijs!
Artikelnummer: CELESTIAL-KIT
Watt seconds | 500 Ws |
Action Mode - Power Variability | 12 f-stops (full to 1/2048 power) |
Color Mode - Power Variability | 12 f-stops (full to 1/2048 power) |
HSS Mode - Power Variability | 12 f-stops (full to 1/2048 power) |
Recycle to Full | 1.5 sec. |
Flash Duration (t.5) - in Action Mode | 1/800 sec. (at full power) | 1/21,400 sec. (at minimum power) |
Flash Duration (t.1) - in Action Mode | 1/340 sec. (at full power) | 1/18,600 sec. (at minimum power) |
Flash Duration (t.5) - in Color Mode | 1/800 sec. (at full power) | 1/10,800 sec. (at minimum power) |
Flash Duration (t.1) - in Color Mode | 1/340 sec. (at full power) | 1/8,200 sec. (at minimum power) |
Power Requirements | 18VDC, 45Wh battery |
Charger Requirements | IN: 100-240-VAC, 50/60Hz, 1A, OUT: 20.5VDC, 2.5A Max |
Internal Receiver Range | 75’ – 200’, depending on orientation |
Sync / Trigger Voltage | Less than 5 volts (safe for use with DSLR cameras) |
Modeling Lamp | 160 W Equivalent Daylight-Balanced |
Modeling Lamp Usage | ~90 mins. at full power on a fully charged battery |
Modeling Lamp Fan Audibility (Full) | No internal fan |
LUX at 6' with bare bulb | 340lx |
LUX at 6' with diffusion dome | 200lx |
LUX at 6' with diffusion dome and 8.5HOR | 500lx |
LUX at 3' with bare bulb | 1500lx |
LUX at 3' with diffusion dome | 800lx |
LUX at 3' with diffusion dome and 8.5HOR | 1800lx |
Flashtube | 10mm single-ring flashtube (daylight-balanced and UV-coated) |
LCD Display | 2.3" display |
Stand Mount | Fits stands up to 5/8 in. |
Umbrella Mount | Accepts umbrella rods up to 9mm |
Weight | 4.6 lbs. with Battery |
Dimensions | 6.5 in. (height) x 5.25 in. (width) x 8 in. (length) |